How much precision is precisely enough?
Lunch from the lab
The pearl on the spoon looks like caviar but tastes like a raspberry. When it bursts on the palate it emits juice. There’s no magic to that but plain chemistry: algae alginate, a calcium bath, and a few grams of precision.
For a long time, the kitchen was regarded as a place of craft in which experience and emotion matter. That changed in 1988 when French physical chemist Hervé This together with physicist Nicholas Kurti laid the foundation for “molecular gastronomy” systematically investigating the physical and chemical events taking place in the process of cooking. Those ideas acquired fame by Ferran Adrià in his restaurant elBulli in Spain: Adrià served hot ice cream, ball-shaped sauces, and crackling crystals that turned the expectations of his patrons upside down.
The ingredients for molecular cuisine are dissected into their individual components and re-composed. Instead of the chef’s skills, precision processes determine the successful outcome of a meal. Every gram or ounce, every degree centigrade or Fahrenheit, and every second of reaction time are extremely important: At 50 degrees centigrade (122 degrees Fahrenheit) the protein myosin in beef begins to denature. At 60 degrees centigrade (140 degrees Fahrenheit) collagen starts to shrink, and at 55 degrees centigrade (131 degrees Fahrenheit) meat is perfectly medium rare. An egg in a vacuum is cooked in a water bath at exactly 69 degrees centigrade (156.2 degrees Fahrenheit). That’s the temperature at which the egg white solidifies while the yolk stays creamy. Snap-freezing using liquid hydrogen makes the massive temperature difference to indoor air cause emulsions to freeze within seconds before ice crystals can form.
Today, the gourmet restaurant elBulli is a museum while parts of molecular cuisine have made it into everyday cooking. What used to require a laboratory, fits into a kitchen cabinet today: food dehydrators, household vacuum sealers, and sous vide sticks. Ingredients like agar, xanthan gum, and soy lecithin have long become available in many supermarkets.
0.01 grams (0,00035 ounces):
That’s the precision measurement of specialty spoon scales for molecular cuisine that are being used just like pipettes and syringes making it possible to add ingredients with accuracy down to each drop.
Football on a data high
Every NFL football contains a transmitter radioing its location 25 times per second to antennas mounted underneath the stadium roof. The NFL, which is the world’s top-selling sports league (with sales of more than 23 billion U.S. dollars in 2024), measures its games with precision that’s hardly rivalled by any other professional sport.
Every player wears two RFID (radio frequency identification) chips in the shoulder pads weighing only a few grams and reporting their position twelve times per second. Referees and pylons are marked as well.
Ultra-wideband antennas installed in the stadium capture the signals and precisely localize positions down to a few centimeters or inches. As a result, every play generates thousands of data points that are analyzed in fractions of a second. From the signals emanating from the players and the ball, an AI unit calculates the trajectory of the ball, speed of the pass, and ball possession in real time. Specialty AI models indicate the probability of how many yards are to be expected with a particular lineup and if a pass will be received. These data are available for the live broadcasts within fractions of a second. The coaches on the sidelines are allowed to use this information only after the game: The NFL has banned the utilization of artificial intelligence providing active tactical recommendations or making predictions for the opponent’s next play, so humans continue to choose the play. The data gained from the game also help the NFL to better understand injuries and to design helmets and jerseys for greater safety.
3.5 terabytes
of data and video footage are generated by the NFL per game.
The geometry of sound
Violin-making is one of the most sophisticated combinations of craftsmanship, mechanics, and acoustics.
The types of timber – spruce for the top and maple for the back – are shaped using finger planes, chisels, and scrapers. Ideally, the thickness of the spruce top is between 2.4 and 3.5 millimeters (0.09 to 0.14 inches) – depending on the structure and thickness of the timber. Violin-makers don’t just trust the precision of thickness meters in that regard but test the resonance frequencies also by slightly tapping the timber. One tenth of a millimeter too much timber will inhibit oscillation while one tenth too little will jeopardize the static load capacity vis-à-vis the string tension of roughly 27 kilograms (59 pounds).
The sound post – a cylindrical spruce stick standing unglued between the top and the back – determines the response and balance of the sound. Even a minute shift by one tenth of a millimeter is audible by a well-trained ear as brightness, bass volume, and partial tones of the instrument change.
Equal precision is necessary for installing the maple bridge. Its feet must perfectly rest on the curvature of the top to ensure loss-free transmission of the strings’ oscillation. On a violin, precision is not only measured in tenths of a millimeter but above all determines if an instrument develops great sound potential.
200 to 400:
That’s how many working hours a violin-maker needs to invest in creating a new violin.
Surgery at the limit
When fingers or hands that have been severed in an accident must be reattached and individual nerve fibers connected with such precision that feelings and functions will return specialists capable of utmost precision need to work in the operating room.
While microsurgeons connect blood vessels and nerve fibers with diameters of 0.8 to 2.0 millimeters (0.03 to 0.07 inches) super-microsurgery calls for even greater precision: when replanting fingertips or treating lymphedemas tiniest lymphatic vessels and capillaries with diameters of 0.3 to 0.8 millimeters (0.01 to 0.03 inches) are sewn together.
This requires specialty surgical instruments with needles so small that they can hardly be seen by the naked eye. That’s why magnifying spectacles are used that enlarge the surgical field six- to 40-fold combined with shadow-free illumination. In addition, the microscopes provide a deep-focus 3D image of the extremely delicate structures.
Such delicate tissue causes the surgeon’s motor skills to reach its limits. To work with millimeter accuracy, surgeons use special holding techniques firmly supporting the balls of the hand and forearms. Moreover, modern microsurgical robots can filter out the natural physiological trembling of the hand and reduce the surgeon’s movements at a ratio of 20:1 for example: If, for instance, the super-microsurgeon moves the console by two centimeters (0.8 inches) the instrument in the patient’s tissue moves only by one millimeter (0.04 inches).
There’s no room for fault tolerance in super-microsurgery: Just one vascular puncture can lead to thrombosis causing tissue to necrotize.
0.01 to 0.02 millimeters (0.0004 to 0.0008 inches):
That’s how thin the sutures used in super-microsurgery are, in other words, three to seven times thinner than a human hair.
Precision at the wrist
The watchmakers’ craft is precision work with a long tradition: Up until the 16th century, locksmiths and blacksmiths used to build clocks. The invention of the spring drive subsequently made the mechanical system so much smaller that clocks no longer needed weights. The wearable watch was invented and led to a dedicated occupational profile: the watchmaker. From 1540 on, the first watchmaker associations existed in Paris.
Many mechanical wrist watches beat at a rate of 28,800 semi-oscillations equating to nearly 700,000 beats per day. A clockwork consists of 150 to 600 parts and watchmakers work with tolerances of a few micrometers. For comparison: A human hair is around 70 micrometers thick. Some pivots are thinner than 0.1 millimeter (0.004 inches) and rotate in rubies. A dust particle or touch of magnetism is enough to interfere with the mechanical system. Even variations in the thousandth-millimeter range lead to friction or cause a watch to stop. That’s why watchmakers work on some parts under a microscope using extremely delicate tools, lathes, and milling machines.
The balance spring that’s as thin as a hair reacts extremely sensitively to the smallest changes in moisture, magnetism, and shocks. A variation of just a few hundred nanometers in the thickness of the spiral changes a watch’s accuracy by several minutes per day. Specialty alloys such as Nivarox or silicon reduce the effect of temperature and magnetic fields on the balance spring.
A precise geometry of pallets and escape wheel ensures the barrel’s controlled dispensing of energy to the clockwork. When servicing a watch a watchmaker must apply a micro dose of the most delicate watch oil to the ruby bearing: Too much oil slows down the gear wheels and too little leads to wear. Beveling and polishing of the edges removes the tiniest burs that might block the clockwork.
Even though today any smartphone will show the time of day with accuracy down to the second the fascination with high-end mechanical watches – and thus the expertise of the watchmakers – has remained unbroken.
–4 to +6 seconds:
That’s how much of a maximum rate variation per day a chronometer certified by the Swiss testing organization COSC may exhibit.
Tracking down criminals
Sherlock Holmes would be amazed: In recent decades, forensics has evolved into a high-precision, data-supported science that minimizes wrongful convictions. The greatest progress has been made in the following four areas:
In genetics, the DNA analysis is regarded as the most precise forensic method. State-of-the-art technologies make it possible to identify individuals even by means of the smallest traces of a few skin cells. The STR (short tandem repeats) method investigates 16 to 24 gene locations, so-called loci, by default. The probability that two unrelated people exhibit exactly the same profile is far below 1 to 1 billion.
When firing a gun, the barrel leaves microscopically small traces on the bullet and the cartridge case. Under a comparison microscope in the ballistics department, comparison ammunition and ammunition from the crime scene are placed side by side. Computer-aided systems match consistencies the size of millimeters in the surface topographies of the cartridge bases and projectiles. An expert then performs the final evaluation of the matches.
To prove the presence of poisons, medications, or illegal drugs in blood, urine, or hair, forensic scientists in toxicology use the combination of separation and quantification of molecules by means of GC-MS (gas chromatography with mass spectrometry). Gas chromatography separates a mixture into its individual components. Subsequent mass spectrometry ionizes the molecules, dissects them into fragments, measures their mass-to-charge ratio, and generates a type of “fingerprint” enabling clear chemical identification.
Modern crime scene documentation no longer relies just on photographs and chalk lines. Using a terrestrial 3D laser scanner (LiDAR), scenes can be digitized with millimeter accuracy. The device captures millions of individual measuring points per second to create a high-precision point cloud. It enables trajectories of projectiles, blood spatter impact angles, or witness lines of sight to be calculated and reconstructed on a computer afterward. This has the benefit that investigators and judges can “inspect” the virtual crime scene from any perspective.
1 to 2 millimeters (0.04 to 0.08 inches)
on a distance of several meters: That’s the measuring accuracy of a LiDAR scanner used for documenting a crime scene.